If you do not have total black and white points, you may use the “levels” option to adjust the points.5. You may check the areas with your ‘info’ tool. Your goal is to have some area in the design that is 100 percent black and an area that is 100 percent white. It is recommended that you set your white and black points. How can I give my print more depth and/or contrast?In screen-printing, you are working with black and white gray scales to set the tone of the design. This can be creating by blending a mixing white (like your mixing-system white) with an extender at about a 50-50 ratio. The wet white should be a transparent white. The wet white is used on both light and dark shirts and will be printed before all wet-on-wet colors, allowing it to mix with them. The use of a “wet white” is the best defense for this situation.

Even with correct color data and top quality inks, you must prepare for this. The base white is used on dark garments and will be printed first, then flashed and followed byt eh remaining colors wet-on-wet.The correct rotation is: White Base – Flash - Wet white - Yellow- Magenta - Cyan - Black (You shouldn’t have to print Black on Black garments)When printing with the under base white, it should resemble a gray study of the design, rather than a flat solid plate of white. Select the lightness channel, duplicate it, invert, but use curves to choke back the plate by only 8-10 percent. How do I make a white plate for dark garments?Use a white under base plate as you would with a wet white in l-a-b mode. Do not use a bleed-resistant white, for it will build up during the print run.6. The black plate should resemble a touch plate.

Black was never designed to be an equal partner in this process. The black was added because of the inability of CMY to hit the darkest color shades. Why does my black plate dominate the design?The color theory behind this process is that the CMY portion of the four color process set is the subtractive of RGB. The halftone underlay will eliminate mottling and smearing, creating a clean, easy-to-print design.7. This lays the foundation of the tints and shades of the design, creating a stark, crisp print. The two main considerations for using spot color are opacity and print rotation.

Spot process separation studio 4 review